Dryer vents appear in home inspection reports regularly, and they catch people off guard — usually a few days before closing, when nobody wants a new item on the list.
Here is what inspectors look at, what tends to get written up, and what it means if you are on either side of a sale.
What an inspector is actually checking
A home inspector is not cleaning the vent or running a camera up it. They are looking at what is visible and testing what is testable:
- The material of the connector behind the dryer
- Whether the connection is secure at both ends
- Whether the exterior termination exists, and whether its flap works
- Whether there is airflow at the termination with the dryer running
- Whether the exhaust discharges outdoors rather than into a crawl space, attic, basement or garage
- Visible lint accumulation
- For gas dryers, whether the installation looks correct
Much of a dryer vent is concealed, so what gets reported is what can be seen and reached.
The items that commonly get flagged
Plastic or vinyl hose. Prohibited for dryer exhaust under current codes in most jurisdictions, and has been for a long time. If white plastic hose is present it almost always gets written up.
The exhaust discharging indoors. A duct that terminates in a crawl space, attic, basement or garage rather than outdoors. This is reported as a defect, and reasonably so.
A disconnected duct. Where a section has come apart, the inspector may well not be able to see where — only that there is no airflow outside while the dryer runs.
A crushed connector. Visible immediately behind the dryer, and one of the most frequently noted items.
A missing, broken or seized exterior flap. Easy to check and easy to report.
Screening over the termination. Mesh traps lint. Some inspectors flag it specifically.
Heavy lint accumulation. Where it is visible at the termination or behind the dryer.
An excessive run. Where the length and bends clearly exceed what is allowed. The limit is 35 feet of developed length, reduced five feet per 90-degree bend and two and a half per 45 — so a run with four right angles is allowed 15 feet. We cover this in how long can a dryer vent be.
Fastening with screws. Screws projecting into the duct catch lint. Joints are meant to be secured with clamps or foil tape.
Why older DMV housing produces more of these
Much of Silver Spring, Takoma Park, Wheaton and the DC row house stock predates dryers being a standard fixture. The exhaust was added later, often by whoever was available, and sometimes more than once as laundry locations moved.
That produces exactly the conditions inspectors write up: long runs, multiple bends, foil hose in places it should not be, terminations added wherever was easiest, and joints assembled with whatever was to hand.
None of it was necessarily wrong when it was done. Codes changed, and a lot of it has been moved since.
If you are selling
Dealing with this before the inspection is considerably easier than after.
Two reasons. First, an inspection item becomes a negotiating point, and buyers tend to assign a larger number to an unknown problem than it actually costs to put right. Second, a vent issue discovered late can introduce delay at the worst moment.
What is worth checking yourself: whether the connector behind the dryer is plastic, whether it is crushed, whether there is airflow at the termination with the dryer running, and whether the flap outside opens and closes.
If any of those look wrong, that is a repair question rather than a cleaning one — see dryer vent repair or cleaning. If an inspection flags damage, see our dryer vent repair service.
If you are buying
Dryer vent items are usually among the less alarming things in a report, and most are straightforward to resolve.
The two worth taking seriously are exhaust discharging into the structure, and anything to do with a gas dryer installation. The first puts heat, moisture and lint into a space not built for it. The second is a combustion matter, and gas work is for a qualified technician in that trade.
The rest — foil hose, a crushed connector, a broken flap, accumulated lint — are ordinary items.
Worth knowing: an inspection tells you the visible condition, not the state of the concealed run. A report that says nothing about the duct inside the walls is not evidence that it is clear. If you are moving into a house where nobody can tell you when the vent was last cleaned, that is a reasonable thing to have done early rather than discovering it through a dryer that takes two cycles.
What we can and cannot help with
We clean and repair dryer vents, including replacing crushed and torn hose, reconnecting separated sections, and dealing with damaged exterior hoods. If an inspection item is one of those, it is work we do.
We do not issue code compliance certificates, and we are not home inspectors. Where an item needs sign-off for a sale, that is a matter for the inspector or the relevant authority.
We do not do gas appliance work or electrical work. Anything involving the gas supply or the wiring to the dryer is for a qualified technician in that trade.
Frequently asked questions
Do home inspectors check dryer vents?
Yes, as part of the visible inspection. They look at the connector material and connections, the exterior termination and its flap, whether there is airflow, whether the exhaust goes outdoors, and visible lint. The concealed portion of the run is generally outside the scope.
Is plastic dryer vent hose a code violation?
Plastic and vinyl hose is prohibited for dryer exhaust under current codes in most jurisdictions. If it is present, expect it to be noted.
Should I clean the dryer vent before selling?
It is worth checking the condition before the inspection rather than after. An item in a report becomes a negotiating point, and buyers typically assume a larger cost than the actual one.
Can you give me documentation that the vent was cleaned?
We can tell you what we did and what we found. We do not issue code compliance certificates — that is a matter for an inspector or the relevant authority.
The inspection says the dryer vents into the crawl space. How serious is that?
It should be dealt with. Exhaust discharging inside a structure introduces heat, moisture and lint into a space not designed for it. With a gas dryer there is the further matter of combustion products, which must vent outdoors.
How quickly can this be looked at?
Tell us when your inspection or closing date is when you call, and we will tell you honestly whether we can fit it in beforehand.
On a deadline?
Say so when you call — inspection and closing dates are real constraints and we would rather know.
Call More Fresh Air Services at 888-509-3828 or request an estimate. Inspections are free. We are insured and fully registered, and we have worked in the DMV since 2015.
See dryer vent cleaning in Silver Spring MD or dryer vent cleaning in Washington DC.